Switching modes on a Kenwood TH-D74 or TH-D75
FM, DV and DR step by step
The TH‐D74 and its successor, the TH‐D75, work the same way here: the keys, the menus and the menu numbers below apply to both. You switch modes with the [MODE] key, but DV and DR share one position in that cycle. Whether that position is DV or DR is set in the Digital Function Menu. The radio remembers which of the two you used last.
- FM: analogue FM, also used for FM repeaters.
- DV: D‑STAR simplex, radio to radio without a repeater.
- DR: D‑STAR via a repeater or hotspot, which is also how you reach a reflector.
Each press of [MODE] moves to the next mode on the selected band:
- Band A (upper half of the display): FM/NFM → DR (DV) → back to FM/NFM
- Band B (lower half of the display): FM/NFM → DR (DV) → AM → LSB → USB → CW → back to FM/NFM
On the TH‐D74, D‑STAR can only be active on one band at a time. The TH‐D75 can receive D‑STAR on both bands at once. Before you can transmit in DV or DR, your call sign must be set in Menu No. 610 (My Callsign).
From FM to DV (simplex)
- Press [A/B] to select the band you want to use.
- Press [MODE] until the display shows DV or DR.
- Does it show DV? Then you’re done. Does it show DR? Go on with the next step.
- Press [F] and then [MODE]. The Digital Function Menu appears.
- Select DV/DR Select with the [ENC] control or the multi‐scroll key and press [A/B]. The radio switches to DV and returns to the frequency screen.
- For a CQ, press [F], [MODE] again, select Destination Select, press [A/B], select Local CQ and press [ENT]. TO is now set to CQCQCQ.
From FM to DR (repeater or reflector)
- Press [A/B] to select the band you want to use.
- Press [MODE] until the display shows DR or DV.
- If it shows DV, press [F], [MODE], select DV/DR Select and press [A/B] to switch to DR.
- Press and hold [▼] (1 second) to select the access repeater (FROM), e.g. via Repeater List.
- Press and hold [▲] (1 second) to select the destination (TO), e.g. Local CQ or a reflector.
In DR mode the radio fills in the RPT1 and RPT2 fields from the repeater list, so you don’t have to type in the G and module letter yourself.
Switching between DV and DR
- Press [F] and then [MODE] to open the Digital Function Menu.
- Select DV/DR Select and press [A/B].
Each time you do this, the radio switches from DV to DR or back.
Back to FM
Press [MODE] once. On band A the radio goes straight back to FM. On band B the next mode is AM, so keep pressing [MODE] (AM → LSB → USB → CW) until FM appears again.
Useful menu items
Press [MENU] and type the menu number on the keypad to go straight to a menu item.
| Menu No. | Name | What it does |
|---|---|---|
| 103 | FM Narrow | Switches between FM and NFM; this can’t be done with [MODE] |
| 610 | My Callsign | Your own call sign, required before transmitting in DV or DR |
| 617 | FM Auto Det. on DV | When set to On, the radio also receives FM signals while in DV mode (only works in DV, not in DR) |
| 620 | Select Type | Digital squelch: off, code squelch or call sign squelch |
Sources: the Kenwood TH‐D74A/E instruction manual (PDF) and the Kenwood TH‐D75A/E user manual (PDF), sections “Selecting the demodulation mode” and “Digital Function Menu”.